Test print

.gitignore

@@ -0,0 +1 @@
+*.FCBak

powder-loader.scad

@@ -1,152 +0,0 @@
-overall_cylinder_diam = 41;
-chamber_to_center = 6.96;
-chamber_diam = 11.45;
-
-bottom_height = 3;
-
-top_height = 20;
-
-opening_sep = 0.1;
-
-border = 1;
-
-funnel_size = 1;
-
-part = 0;
-
-part_sep = 0.4;
-
-module _end_of_customizer() {}
-
-assert(part >= 0 && part <= 2);
-
-$fn = $preview?30:80;
-
-module overall_cylinder() {
-    translate([0, 0, -20])
-    difference() {
-        cylinder(d = overall_cylinder_diam, h = 20);
-
-        for(i = [0:5]) {
-            rotate([0, 0, i/6*360])
-            translate([chamber_to_center + chamber_diam/2, 0, -1])
-            cylinder(d = chamber_diam, h = 22);
-        }
-    }
-}
-
-if($preview && part == 0)
-color("#777")
-overall_cylinder();
-
-module bottom() {
-    difference() {
-        union() {
-            for(i = [0:5]) {
-                rotate([0, 0, i / 6 * 360])
-                bottom_part();
-            }
-        }
-
-        translate([0, 0, bottom_height])
-        connection(true);
-    }
-}
-
-center_to_bottom_opening_center = chamber_to_center + chamber_diam / 2;
-bottom_opening_diam = center_to_bottom_opening_center * sin(360 / 12) - opening_sep;
-
-module bottom_part() {
-    difference() {
-        union() {
-            rotate([0, 0, 360/12])
-            linear_extrude(bottom_height)
-            polygon([
-                [0, 0],
-                [overall_cylinder_diam / 2 * cos(360 / 12),  overall_cylinder_diam / 2 * sin(360 / 12)],
-                [overall_cylinder_diam / 2 * cos(360 / 12), -overall_cylinder_diam / 2 * sin(360 / 12)],
-            ]);
-
-            translate([center_to_bottom_opening_center, 0, -funnel_size])
-            cylinder(
-                d1 = bottom_opening_diam,
-                d2 = bottom_opening_diam + funnel_size,
-                h = funnel_size
-            );
-        }
-
-        translate([center_to_bottom_opening_center, 0, -1 - funnel_size])
-        cylinder(d = bottom_opening_diam, h = bottom_height + 2 + funnel_size);
-
-        rotate([0, 0, 360/6])
-        translate([center_to_bottom_opening_center, 0, -1 - funnel_size])
-        cylinder(d = bottom_opening_diam, h = bottom_height + 2 + funnel_size);
-    }
-}
-
-if(part == 0 || part == 1)
-color("#dd08")
-bottom();
-
-module top() {
-    for(i = [0:5]) {
-        rotate([0, 0, i / 6 * 360])
-        top_part();
-    }
-
-    connection(false);
-}
-
-module top_part() {
-    difference() {
-        linear_extrude(top_height)
-        polygon([
-            [0, 0],
-            [overall_cylinder_diam / 2 * cos(360 / 12),  overall_cylinder_diam / 2 * sin(360 / 12)],
-            [overall_cylinder_diam / 2 * cos(360 / 12), -overall_cylinder_diam / 2 * sin(360 / 12)],
-        ]);
-
-        top_part_hollow();
-    }
-}
-
-module top_part_hollow() {
-    adjusted_radius = overall_cylinder_diam / 2 - border;
-
-    hull() {
-        translate([center_to_bottom_opening_center, 0, 0])
-        cylinder(d = bottom_opening_diam, h = 0.1);
-
-        translate([0, 0, top_height - 0.1 - border])
-        linear_extrude(0.1)
-        polygon([
-            [border, 0],
-            [adjusted_radius * cos(360 / 12),  adjusted_radius * sin(360 / 12) - border / 2],
-            [adjusted_radius * cos(360 / 12), -adjusted_radius * sin(360 / 12) + border / 2],
-        ]);
-    }
-}
-
-if(part == 0 || part == 2)
-color("#4d48")
-translate([0, 0, bottom_height + part_sep])
-top();
-
-module connection(hole) {
-    sep_hole = hole?part_sep:0;
-    sep_screw = hole?0:part_sep;
-
-    translate([0, 0, -1.5 - sep_screw * 2])
-    cylinder(d = 4 + sep_hole, h = 1.5 + sep_screw * 2);
-
-    translate([0, 0, -3 - sep_screw * 2])
-    cylinder(d1 = 8 + sep_hole, d2 = 4 + sep_hole, h = 1.5);
-}
-
-if($preview && part == 1)
-color("#f008")
-for(i = [0:5]) {
-    rotate([0, 0, i/6*360 + 360 / 12])
-    translate([center_to_bottom_opening_center, 0, 01])
-    cylinder(d = bottom_opening_diam, h = bottom_height + 2);
-}