Redesign in OpenSCAD

This commit is contained in:
Remi Rampin 2024-02-02 16:28:20 -05:00
parent 62aea091b5
commit d326edb680
1 changed files with 61 additions and 0 deletions

61
phone-stand-keychain.scad Normal file
View File

@ -0,0 +1,61 @@
/* [Keychain] */
// overall height
height = 10;
// length, increase if phone falls backwards
length = 60;
// thickness of the long piece
thickness = 4.3;
// diameter of the hole for the key ring
hole_diameter = 4;
/* [Phone] */
// angle between the phone and the horizontal, 90=vertical
angle = 65;
// the thickness of the phone, if this value is too small, it won't fit between the supports
phone_thickness = 11.3;
/* [Supports] */
// the length the supports extend from the long piece
supports_length = 6.6;
// the thickness of the first support, in front of the phone
support1_thickness = 7;
// the thickness of the second support, behind the phone
support2_thickness = 4.5;
module long_piece() {
translate([-thickness, 0, 0]) cube([thickness, length, height]);
}
module phone() {
translate([0, 0, height]) rotate([angle, 0, 0]) translate([0, -10, -phone_thickness - support1_thickness]) cube([40, 80, phone_thickness]);
}
big_num = 50;
module supports() {
cube_length_transverse = support1_thickness + phone_thickness + support2_thickness;
cube_length = cube_length_transverse / sin(angle);
difference() {
cube([supports_length, cube_length, height]);
// cut out phone slot
phone();
// cut out back of support2
translate([0, 0, height]) rotate([angle, 0, 0]) translate([0, -10, -big_num - phone_thickness - support1_thickness - support2_thickness]) cube([big_num, big_num, big_num]);
}
}
long_piece();
supports();
%phone();